Contract and Series Production

CNC Subcontract Machining

CNC operations on customer-supplied material or semi-finished parts are defined around their incoming condition and the required delivery state. We clarify the surfaces to be machined, reference features and responsibilities before production.

Incoming material
Customer stock or semi-finished parts
Scope of work
Defined surfaces and operations
Delivery definition
Acceptance criteria after machining
MANUFACTURING EXPERTISE

Defined operations on customer-supplied material

A CNC subcontract order may cover selected machining services separately from material procurement. Examples include turning an outside diameter on cut stock, completing holes in a semi-finished part or machining the mounting faces of a casting. The incoming material condition directly affects the surfaces that can be produced and the workholding approach. Turned features are assessed through CNC turning services, while flat surfaces and groups of holes are considered under CNC milling.
Incoming partInformation needed from the customerAssessment before machining
Cut stockMaterial specification, cut dimensions and quantityClamping length and machining allowance
Pre-machined semi-finished partExisting dimensions and features to completeSuitability of references and remaining allowance
Casting or forgingBlank drawing and surfaces to machinePosition, surface variation and workholding
Part returning from another processCompleted treatment and required final dimensionsOperation sequence for its current condition

Sharing dimensions and quantities before physical delivery allows an initial assessment. Records connecting the specified material grade to the supplied stock should accompany it where available. A machining service does not automatically include material verification or acceptance of earlier manufacturing stages; any additional examination required is defined separately.

Machining allowance and reference surfaces

A semi-finished part close to final size is not necessarily straightforward to machine. Sufficient clamping space, the condition of reference surfaces and the allowance remaining for related dimensions all matter. Positional variation in a casting or forging may change the available allowance in particular areas. These points are discussed during assessment, with surfaces outside the machining scope clearly identified. The quotation can then reflect the actual incoming condition rather than the final drawing alone.

  • Distinguish surfaces to machine from surfaces to retain on the same drawing.
  • Report dimensions and deviations inherited from previous operations.
  • Specify the sequence of any coating or heat treatment.
Holding a part through internal expansion

A segmented mandrel expands against the ring bore, showing how axial drawbar movement relates to the internal holding surface.

Separating machining and supply responsibilities

The customer may supply the material, while cutting, additional stock, external processing and packaging require separate agreement. Written boundaries make the included services clear. If operation planning and staged approvals for the entire batch are also required, the contract machining and batch production scope can be assessed alongside them. Where workholding or the remaining allowance on a new semi-finished part is uncertain, conditions for proceeding from the first part can be discussed.

What to send for a CNC machining quotation

Provide the final technical drawing alongside an incoming part drawing, photographs or its existing dimensions. Include quantity, the condition in which material will arrive, operations required and the intended final state. Discuss any need for sample assessment at the outset. Operations outside the quotation, the total quantity to be delivered and the condition of remaining material are also defined to avoid differing expectations during production.

Questions about CNC subcontract machining

Can we supply material and order machining services only?

Defined machining operations on customer-supplied material can be assessed. Stock dimensions, grade, quantity and the required final drawing are reviewed together to establish suitability for clamping and machining and to define the service scope.

Can pre-machined components be completed?

Additional operations can be assessed where existing dimensions, reference surfaces and remaining machining allowances are suitable. Suitability is established only after considering whether deviations from earlier operations affect the new work.

Does every surface on a casting need machining?

No. The drawing should distinguish surfaces to machine, unfinished surfaces to retain and dimensional references. Blank position and allowances are assessed against this scope; any need to machine additional surfaces is discussed separately.